SDF tunnel construction axial flow fan
SDF tunnel construction axial flow fan is a special supply fan and an exhaust fan for vertical (inclined) shaft supply and exhaust ventilation in the extra-long tunnel. It is widely used in the centralized supply type, centralized exhaust type, and combined supply and exhaust type of tunnel longitudinal ventilation. It is also suitable for semi-horizontal, full-horizontal, and tunnel auxiliary ventilation. It can be used according to the specific performance parameters of the design, The installation angle of the blade can be adjusted by using different impeller diameters or the same impeller diameter to meet the requirements of air supply and exhaust with different air volume and pressure.
product mix
The fan is composed of five parts: collector, inlet silencer, primary group, secondary group, and outlet silencer
B Each stage is driven by a motor with the same rated power. The impeller is directly connected to the motor shaft. The rotation direction of the impeller between the two adjacent stages is opposite. After entering the first stage impeller to obtain energy, the gas is accelerated and discharged through the second stage impeller. The rear stage impeller has both the static blade function of the axial flow fan and increases the gas flow, thus achieving higher air pressure and efficiency.
C The fan can be disassembled from the middle flange and used in a single section, but pay attention to safety to prevent the impeller from being damaged due to the suction of foreign matters.
Performance characteristics
1. According to the characteristics of tunnel construction ventilation and airflow characteristics, new energy-saving products are developed.
2. Long air supply distance, high efficiency, low noise, and large air volume.
3. The impeller is light in weight, strong in strength, and of ultra-high balance grade, extending the service life of the fan motor;
4. Blade angle can be adjusted according to different ventilation requirements.
5. The muffler is optimized to achieve a good noise reduction effect.
6. The fan adopts a special frequency conversion control cabinet, which can adjust the air volume continuously, conveniently, and reliably. Users can select the best air volume and air pressure according to the real-time situation of tunnel excavation, so as to achieve the best energy saving in system control.
7. Carry out simulation analysis on the simulation site, optimize the blade shape, make the relationship between the fan air volume, air pressure, and efficiency match best, and its efficiency can reach more than 80%, so as to achieve the best energy saving on the fan structural performance.
8. According to different tunnel construction conditions, the fan shall be customized and designed to achieve the best match between the fan and the construction conditions, so as to achieve the best energy saving in the construction conditions.
Product Specification:
Model No |
SDF SDF4-SDF16 |
Use |
Special supply fan and an exhaust fan for vertical (inclined) shaft supply and exhaust ventilation in the extra-long tunnel. |
Voltage (V) |
380V |
Color |
Blue/Red/White/Gray/Yellow/Customized |
Application Industries |
Plant, breeding, tunnel, construction, equipment cooling, etc |
Size |
Have many sizes, Can provide according to customer's requirement size |
Brand Name |
Zhi Feng |
Power |
1.7~55KW |
Rotating Speed |
2900~960rpm |
Total Pressure |
375~5380Pa |
Airflow |
165~1580M3/h |
Package |
Wooden Box/Steel frame |
Material |
SS304,SS316 and Q235 |
Frequency |
50Hz/60Hz |
Impeller Type |
Backward/Forward/Radial Blade |
After-Sales Service |
Online support |
Efficiency(%) |
Over 85% |
Exported to |
All Countries |
Warranty |
18 Months |
Product Parameters
Product details
Model NO. |
SDF-10 |
Air flow |
1170-670m3/min |
Working Pressure |
510-300 pa |
Motor power |
2x55 KW |
Voltage |
380V/440V/220V/600V |
Color |
Red/White/Grey/yellow/blue/Customized |
Package |
Wooden Case |
Detailed Photos
![Sdf Tunnel Fans Are Primarily Used to Control and Manage Airflow Tunnels Remove Exhaust Gases, Control Temperature, and Provide Fresh Air](//www.micstatic.com/athena/img/transparent.png)
![Sdf Tunnel Fans Are Primarily Used to Control and Manage Airflow Tunnels Remove Exhaust Gases, Control Temperature, and Provide Fresh Air](//www.micstatic.com/athena/img/transparent.png)
![Sdf Tunnel Fans Are Primarily Used to Control and Manage Airflow Tunnels Remove Exhaust Gases, Control Temperature, and Provide Fresh Air](//www.micstatic.com/athena/img/transparent.png)
![Sdf Tunnel Fans Are Primarily Used to Control and Manage Airflow Tunnels Remove Exhaust Gases, Control Temperature, and Provide Fresh Air](//www.micstatic.com/athena/img/transparent.png)
![Sdf Tunnel Fans Are Primarily Used to Control and Manage Airflow Tunnels Remove Exhaust Gases, Control Temperature, and Provide Fresh Air](//www.micstatic.com/athena/img/transparent.png)
![Sdf Tunnel Fans Are Primarily Used to Control and Manage Airflow Tunnels Remove Exhaust Gases, Control Temperature, and Provide Fresh Air](//www.micstatic.com/athena/img/transparent.png)
![Sdf Tunnel Fans Are Primarily Used to Control and Manage Airflow Tunnels Remove Exhaust Gases, Control Temperature, and Provide Fresh Air](//www.micstatic.com/athena/img/transparent.png)
![Sdf Tunnel Fans Are Primarily Used to Control and Manage Airflow Tunnels Remove Exhaust Gases, Control Temperature, and Provide Fresh Air](//www.micstatic.com/athena/img/transparent.png)
![Sdf Tunnel Fans Are Primarily Used to Control and Manage Airflow Tunnels Remove Exhaust Gases, Control Temperature, and Provide Fresh Air](//www.micstatic.com/athena/img/transparent.png)
![Sdf Tunnel Fans Are Primarily Used to Control and Manage Airflow Tunnels Remove Exhaust Gases, Control Temperature, and Provide Fresh Air](//www.micstatic.com/athena/img/transparent.png)
![Sdf Tunnel Fans Are Primarily Used to Control and Manage Airflow Tunnels Remove Exhaust Gases, Control Temperature, and Provide Fresh Air](//www.micstatic.com/athena/img/transparent.png)
![Sdf Tunnel Fans Are Primarily Used to Control and Manage Airflow Tunnels Remove Exhaust Gases, Control Temperature, and Provide Fresh Air](//www.micstatic.com/athena/img/transparent.png)
![Sdf Tunnel Fans Are Primarily Used to Control and Manage Airflow Tunnels Remove Exhaust Gases, Control Temperature, and Provide Fresh Air](//www.micstatic.com/athena/img/transparent.png)
![Sdf Tunnel Fans Are Primarily Used to Control and Manage Airflow Tunnels Remove Exhaust Gases, Control Temperature, and Provide Fresh Air](//www.micstatic.com/athena/img/transparent.png)
Certifications
Packaging & Shipping
![Sdf Tunnel Fans Are Primarily Used to Control and Manage Airflow Tunnels Remove Exhaust Gases, Control Temperature, and Provide Fresh Air](//www.micstatic.com/athena/img/transparent.png)
1) The equipment is equipped with a number of signs such as a product nameplate, rotation direction sign, wind direction sign, grounding sign, lifting sign, safety warnings, and so on.
2) Product nameplate mainly includes the contents of the equipment: main technical parameters (flow, pressure, motor power, Revolutions Per Minute), product number, manufacturing date, and so on, which is convenient for users to check at any time
3) Small equipment adopts the type of export wood packaging and large equipment, and the steel frame transports large cargo transportation.
4) All equipment is waterproof and rainproof.
Company Profile
![Sdf Tunnel Fans Are Primarily Used to Control and Manage Airflow Tunnels Remove Exhaust Gases, Control Temperature, and Provide Fresh Air](//www.micstatic.com/athena/img/transparent.png)
![Sdf Tunnel Fans Are Primarily Used to Control and Manage Airflow Tunnels Remove Exhaust Gases, Control Temperature, and Provide Fresh Air](//www.micstatic.com/athena/img/transparent.png)
Zibo Hengding Fan Co., Ltd. Is located in Industrial Park, Beijiao Town, Zhoucun District, Zibo City, Shandong Province, China. The company covers an area of 12,000 square meters and a construction area of 8,000 square meters. The company has total assets of 27 million RMB and 186 employees, 46 engineers, and technicians. It has passed ISO9001 quality management system certification and maintained long-term technical cooperation relationships with many colleges and universities, such as Xi'an Jiaotong University, Tianjin Nankai University, etc. Now, it has developed into a modern ventilation equipment manufacturing enterprise with first-class testing and producing equipment, high-quality and excellent production molds, strong scientific research and development strength, a strict quality management system, and gradually perfected development. The company has 15 years of production experience, with an annual output of 5,000 sets of ventilators
Our Advantages
![Sdf Tunnel Fans Are Primarily Used to Control and Manage Airflow Tunnels Remove Exhaust Gases, Control Temperature, and Provide Fresh Air](//www.micstatic.com/athena/img/transparent.png)
Strict quality standards, precision machining, and other spare parts and design maintain product stability, strictly select product parts suppliers, and perfect after-sales service system to allow customers to enjoy a new experience
Our company has introduced the latest research results of the Chinese Academy of Sciences, C4-II ternary flow wing twisted blades, which have high aerodynamic efficiency.
The surface of the ventilator impeller blade is sprayed with advanced super-resistant (CN) metal material to form a wear-resistant, anti-corrosion protection layer on the surface of the blade. The wear resistance of the blade surface is 10 to 50 times higher than that of the ordinary carbon steel material, thereby greatly prolonging the service life of the blade.
Quality assurance measures:
In long-term production management, our company has formed a set of standardized process control measures and control points, which can provide users with high-quality products in all directions. Our company has a good reputation and is an enterprise that users can trust.
Our company has obtained the IS09001 certification from the International Organization for Standardization (see Enterprise Qualification Materials for details). We strictly standardize the operation process and control points of product manufacturing
After Sales Service
When the equipment of the buyer is installed, our company is responsible for on-site installation guidance, personnel training and commissioning of test-drive, The separately purchased fan accessories can be used for telephone connection guidance and debugging
Our company guarantees that the structural safety, aerodynamic performance, running noise, and appearance, quality of the supplied ventilators can be checked and accepted by relevant departments.
The quality assurance period for the supplied ventilator equipment, except for special provisions, is 18 months from the final acceptance of the ventilator.
Q. What information should I provide when inquiring?
A: Fan name/model, KW, Air pressure, Flow rate Air Volume, and temperature
Q. What is your warranty?
A. Our warranty is 18 months after receiving the fans. During the warranty period, replace the damaged parts free of charge. Out warranty period, to provide timely, high-quality technical services and price concessions spare parts to ensure.
continuous safe and high-quality equipment operation.
Q. How does your factory control product quality?
A. We have a quality inspection department. All fans are running more than 3 hours before delivery to test the quality. If there is a quality problem, we will produce a new one.
Q. What are your terms of payment?
A. TT 40% AS THE ADVANCE PAYMENT AND TT 60% AFTER INSPECTION BEFORE SHIPPING.
B. 100% IRREVOCABLE L/C AT STGHT.
Q. What products do you produce?
A. Centrifugal fan, tunnel fan, axial fan, jet fan, mining fan, exhaust fan,anti-corrosion blower, high-pressure blower, explosion proof fan, fan accessories, etc, welcome to contact us to learn more details.
Q. Where is your factory? Can I visit your factory?
A. Zibo Hengding Fan Co., Ltd. Is located in Industrial Park, Beijiao Town, Zhoucun District, Zibo City, Shandong Province, China.
Q. How long will it take to ship after the order?
A. 10-15 Days if you need it urgently, we can discuss it for shorting time.
Q. Is the product customizable?
A. Various types can be customizable.
https://hengdingfan.en.made-in-china.com/contact-info.html