4-2X73 series centrifugal fan
Product introduction: 4-2X73 series centrifugal fan is mainly used for large induced draft and dust removal systems in metallurgy, electric power, cement, and other industries. Due to the development of production, the boiler capacity has increased, the volume of steelmaking furnaces has also increased, and the amount of flue gas in the smelting process has also increased, causing serious air pollution. With the increasingly perfect and strict environmental protection regulations, it is required that the smoke and dust must be purified, so the dust removal fan is designed to be double suction large-scale, that is, with large flow, medium and high-pressure Low noise, common cold and hot media, flat performance curve and wide efficient area. If the performance is similar, it can also be used in other ventilation systems, but the medium temperature shall not exceed 250 ºC. Before the induced draft fan, a dust removal device must be installed to ensure that the dust content in the flue gas entering the fan is reduced as much as possible (generally not more than 200mg/m3). According to the use of general users, the dust removal efficiency shall not be less than 85%, otherwise, the service life of the impeller will be shortened.
Product features:
1. The design of this series of fans is based on the aerodynamic sketch finalized by the fan model test and adopts the patented technology of the inclined cone air inlet, the long-life backward impeller, the oil-proof bearing box, the self-aligning and differential regulating doors, and the turning gear (according to the user's needs) and other advanced proprietary technical achievements.
2. Wide efficient range, easy to select efficient working point.
3. The patented technology of the inclined cone air inlet eliminates the strong eddy current in front of the air inlet, ensures the air inlet stability, and improves the overall efficiency of the fan
4. The impeller adopts the backward wing blade, which reduces the impact of airflow, has good stability, and is not easy to overload the motor. The wing wear-resistant nose blade is adopted, and the wear-resistant lining plate is added at the easily worn part, which increases the strength and wear resistance of the impeller and improves the service life of the impeller.
5. Anti-leakage bearing box adopts a lapped oil slinger to fling oil from the high-speed rotating bearing to the inner wall of the bearing box and flow back to the oil pool. The lower part of the labyrinth seal is equipped with an oil return hole to return some unfiltered oil from the oil slinger to the oil pool. The outer skeleton oil seal can increase the resistance force along the axial direction to intercept some thin oil back to the oil pool, with good dust prevention performance. The upper part of the bearing box is equipped with a breather plug, which reduces the micro-positive pressure inside the bearing box. The side of the bearing box is equipped with an oil level indicator, which can truly display the oil level. Sliding bearings can also be used according to user needs.
6. Self-aligning and differential regulating valves are equipped with self-aligning bearings at the fulcrum of guide vanes. Self-aligning linkage is adopted between the regulating valves on both sides. Due to the use of transmission handles with different angles, the opening of the vanes in the process of adjustment is different, thus realizing differential adjustment. The torque is smaller, and there is no "dead" point during operation and adjustment. The adjustment is flexible, labor-saving, safe and reliable, ensuring that the actuator motor is not overloaded
7. The fan is complete, including the coupling cover, companion flange of air inlet and outlet, anchor bolt of the whole machine, soft connection of air inlet and outlet, temperature gauge (Pt100), vibration measuring device, and slow rotation device, electric actuator or muffler, if necessary
8. The relevant parameters are complete, including the weight of main parts, static and dynamic loads, rotor rotational inertia, regulating gate resistance moment and overall dimensions, etc
9. Key protection measures for product quality:
(1) Design and manufacture according to industry standards.
(2) Fan performance is converted according to the model test
(3) Impeller and main shaft shall be subject to NDT according to standards.
(4) The impeller adopts reinforced wear-resistant impeller
(5) The air inlet and outlet are equipped with a soft connection to prevent deformation, stress interference between the pipe and the fan.
(6) The rotor adopts a vibration protection device.
(7) The slow rotation device (at high temperature) is used to prevent the shutdown shaft from bending.
Product Parameters
| Table of performance parameters of 4-68 type NO. 4A, 4.5A and 5A |
| Machine number |
Drive mode |
Speed r/min |
Serial number |
Full pressure Pa |
Flow m3/h |
Internal efficiency% |
Internal power KW |
Required power KW |
Model power
|
| Model |
power |
| 4 |
A |
2900 |
1
2
3
4
5
6
7 |
2069
2059
2010
1931
1794
1627
1431 |
3984
4534
5083
5633
6182
6732
7281 |
82.3
86.2
88.9
90.0
88.6
83.6
78.2 |
2.78
3.01
3.19
3.36
3.48
3.64
3.70 |
3.34
3.61
3.83
4.03
4.18
4.37
4.44 |
Y112M-2 |
4 |
| 4 |
A |
1450 |
1
2
3
4
5
6
7 |
519
509
500
480
451
402
353 |
1992
2267
2542
2816
3091
3366
3641 |
82.3
86.2
88.9
90.0
88.6
83.6
78.2 |
0.35
0.37
0.40
0.42
0.44
0.45
0.46 |
0.53
0.56
0.60
0.63
0.66
0.65
0.69 |
Y802-4 |
0.75 |
| 4.5 |
A |
2900 |
1
2
3
4
5
6
7 |
2657
2628
2569
2461
2294
2069
1833 |
5790
6573
7355
8137
8920
9702
10485 |
83.3
87.0
89.5
90.5
89.2
84.5
79.4 |
5.13
5.51
5.86
6.15
6.37
6.60
6.72 |
5.90
6.34
6.74
7.07
7.33
7.59
7.73 |
Y132S2-2 |
7.5 |
| 4.5 |
A |
1450 |
1
2
3
4
5
6
7 |
666
657
637
617
568
519
460 |
2895
3286
3678
4069
4460
4851
5242 |
83.3
87.0
89.5
90.5
89.2
84.5
79.4 |
0.64
0.69
0.73
0.77
0.79
0.83
0.85 |
0.90
0.97
1.02
1.08
1.11
1.16
1.19 |
Y90S-2 |
1.1 |
| 5 |
A |
2900 |
1
2
3
4
5
6
7 |
3314
3265
3187
3049
2844
2589
2304 |
8050
9123
10197
11270
12343
13416
14490 |
84.2
87.6
90.0
91.0
89.8
85.3
80.5 |
8.80
9.44
10.03
10.49
10.86
11.31
11.52 |
10.12
10.86
11.53
12.06
12.49
13.01
13.25 |
Y160M2-2 |
15 |
| 5 |
A |
1450 |
1
2
3
4
5
6
7 |
823
813
794
764
715
647
578 |
4025
4562
5098
5635
6172
6708
7245 |
84.2
87.6
90.0
91.0
89.8
85.3
80.5 |
1.09
1.18
1.25
1.32
1.37
1.41
1.45 |
1.42
1.53
1.63
1.72
1.78
1.83
1.89 |
Y100L1-4 |
2.2 |
|
Detailed Photos
Certifications
Packaging & Shipping
1) The equipment is equipped with a number of signs such as a product nameplate, rotation direction sign, wind direction sign, grounding sign, lifting sign, safety warnings, and so on.
2) Product nameplate mainly includes the contents of the equipment: main technical parameters (flow, pressure, motor power, Revolutions Per Minute), product number, manufacturing date, and so on, which is convenient for users to check at any time
3) Small equipment adopts the type of export wood packaging and large equipment, and the steel frame transports large cargo transportation.
4) All equipment is waterproof and rainproof.
Zibo Hengding Fan Co., Ltd. Is located in Industrial Park, Beijiao Town, Zhoucun District, Zibo City, Shandong Province, China. The company covers an area of 12,000 square meters and a construction area of 8,000 square meters. The company has total assets of 27 million RMB and 186 employees, 46 engineers, and technicians. It has passed ISO9001 quality management system certification and has maintained long-term technical cooperation relationships with many colleges and universities, such as Xi'an Jiaotong University, Tianjin Nankai University, and so on. Now, it has developed into a modern ventilation equipment manufacturing enterprise with first-class testing and producing equipment, high-quality and excellent production molds, strong scientific research and development strength, a strict quality management system, and gradually perfected development. The company has 15 years of production experience, with an annual output of 5,000 sets of ventilators
Our Advantages
Strict quality standards, precision machining, and other spare parts and design maintain product stability, strictly select product parts suppliers, and perfect after-sales service system to allow customers to enjoy a new experience
Our company has introduced the latest research results of the Chinese Academy of Sciences, C4-II ternary flow wing twisted blades, which have high aerodynamic efficiency.
The surface of the ventilator impeller blade is sprayed with advanced super-resistant (CN) metal material to form a wear-resistant, anti-corrosion protection layer on the surface of the blade. The wear resistance of the blade surface is 10 to 50 times higher than that of the ordinary carbon steel material, thereby greatly prolonging the service life of the blade.
Quality assurance measures:
In long-term production management, our company has formed a set of standardized process control measures and control points, which can provide users with high-quality products in all directions. Our company has a good reputation and is an enterprise that users can absolutely trust.
Our company has obtained the IS09001 certification from the International Organization for Standardization (see Enterprise Qualification Materials for details). We strictly standardize the operation process and control points of product manufacturing
After Sales Service
When the equipment of the buyer is installed, our company is responsible for on-site installation guidance, personnel training and commissioning of test-drive, The separately purchased fan accessories can be used for telephone connection guidance and debugging
Our company guarantees that the structural safety, aerodynamic performance, running noise, and appearance, quality of the supplied ventilators can be checked and accepted by relevant departments.
The quality assurance period for the supplied ventilator equipment, except for special provisions, is 18 months from the final acceptance of the ventilator.
Q. What information should I provide when inquiring?
A: Fan name/model, KW, Air pressure, Flow rate Air Volume, and temperature
Q. What is your warranty?
A. Our warranty is 18 months after receiving the fans. During the warranty period, replace the damaged parts free of charge. Out warranty period, to provide timely, high-quality technical services and price concessions spare parts to ensure.
continuous safe and high-quality equipment operation.
Q. How does your factory control product quality?
A. We have a quality inspection department. All fans are running more than 3 hours before delivery to test the quality. If there is a quality problem, we will produce a new one.
Q. What are your terms of payment?
A. TT 40% AS THE ADVANCE PAYMENT AND TT 60% AFTER INSPECTION BEFORE SHIPPING.
B. 100% IRREVOCABLE L/C AT STGHT.
Q. What products do you produce?
A. Centrifugal fan, tunnel fan, axial fan, jet fan, mining fan, exhaust fan,anti-corrosion blower, high-pressure blower, explosion proof fan, fan accessories, etc, welcome to contact us to learn more details.
Q. Where is your factory? Can I visit your factory?
A. Zibo Hengding Fan Co., Ltd. Is located in Industrial Park, Beijiao Town, Zhoucun District, Zibo City, Shandong Province, China.
Q. How long will it take to ship after the order?
A. 10-15 Days If you need it urgently, we can discuss it for shorting time.
Q. Is the product customizable?
A. Various types can be customizable.
Contact Us
Company: Zibo Hengding Fan Co., Ltd.
Address: Industrial Park, Beijiao Town, Zhoucun District, Zibo City, Shandong Province, China.
Website: http://hengdingfan.en.made-in-china.com
Tel: +86 15653306160
Fax: +86-533-6069989
Cellphone: +86 15653306160
https://hengdingfan.en.made-in-china.com/contact-info.html
){kind=link}