4-68 centrifugal fan
4-68 centrifugal fans (hereinafter referred to as fans) can be used for general ventilation. Its service conditions are as follows:
1. Application site: As the indoor ventilation of general factories and large buildings, it can be used as both input gas and output gas.
2. Types of gas to be transported: air and other gases that are not spontaneous combustion, harmless to the human body, and non-corrosive to steel materials.
3. Impurities in the gas: there shall be no viscous substances in the gas, and the dust and hard particles contained in the gas shall not exceed 150 mg/m3.
4. The temperature of gas shall not exceed 80 ºC.
2. Fan type:
1. The fan is single suction, and the machine numbers are № 2.8, 3.15, 3.55, 4, 4.5, 5, 6.3, 8, 10, 12.5, 16, 20, etc.
2. Each type of fan can also be made into two types right rotation or left rotation. When viewed from one end of the motor, the impeller rotates clockwise, which is called the right rotation fan, which is represented by "right". counterclockwise, which is called left rotation fan, and is represented by "left".
3. The outlet position of the fan is expressed by the outlet angle of the casing. Both "left" and "right" can be made into 0o, and 45o, such as 135o, 180o, and 225o.
3. Structural characteristics of main components
№ 2.8-5 of 4-68 fan is mainly composed of an impeller, casing, air inlet, and other parts equipped with a direct-connected motor. № 6.3-20 has a transmission part in addition to the above parts.
1. Impeller: It is composed of 12 backward-inclined wing-shaped blades welded between the single-cone wheel cover and the flat-plate wheel disc. They are all made of steel plates and have been calibrated by static and dynamic balance, with good air performance, high efficiency, and stable operation.
2. Casing: the casing is a volute formed by welding ordinary steel plates. The casing is made into two different types. № 2.8-12.5 casing is integral and cannot be disassembled. № 16 and № 20 casings are made into three open types, and the upper part is divided into two parts along the vertical centerline, in addition to being divided into two parts along the horizontal plane of the split, which are connected by bolts.
3. Air inlet: it is made into a converging streamlined integral structure and fixed on the inlet side of the fan with bolts.
4. Drive group: composed of main shaft, bearing box, rolling bearing, pulley or coupling, etc. The spindle is made of high-quality steel. № 6.3-12.5 fans of four unit numbers are of integral structure, with a thermometer and oil pointer installed on the bearing. № 16 and № 20 fans of two unit numbers are equipped with two parallel bearing blocks, with thermometers installed on the bearing block and lubricated with bearing grease.4-68
Product Parameters
Table of performance parameters of 4-68 type NO. 4A, 4.5A and 5A |
Machine number |
Drive mode |
Speed r/min |
Serial number |
Full pressure Pa |
Flow m3/h |
Internal efficiency% |
Internal power KW |
Required power KW |
Model Power
|
Model |
power |
4 |
A |
2900 |
1 2 3 4 5 6 7 |
2069 2059 2010 1931 1794 1627 1431 |
3984 4534 5083 5633 6182 6732 7281 |
82.3 86.2 88.9 90.0 88.6 83.6 78.2 |
2.78 3.01 3.19 3.36 3.48 3.64 3.70 |
3.34 3.61 3.83 4.03 4.18 4.37 4.44 |
Y112M-2 |
4 |
4 |
A |
1450 |
1 2 3 4 5 6 7 |
519 509 500 480 451 402 353 |
1992 2267 2542 2816 3091 3366 3641 |
82.3 86.2 88.9 90.0 88.6 83.6 78.2 |
0.35 0.37 0.40 0.42 0.44 0.45 0.46 |
0.53 0.56 0.60 0.63 0.66 0.65 0.69 |
Y802-4 |
0.75 |
4.5 |
A |
2900 |
1 2 3 4 5 6 7 |
2657 2628 2569 2461 2294 2069 1833 |
5790 6573 7355 8137 8920 9702 10485 |
83.3 87.0 89.5 90.5 89.2 84.5 79.4 |
5.13 5.51 5.86 6.15 6.37 6.60 6.72 |
5.90 6.34 6.74 7.07 7.33 7.59 7.73 |
Y132S2-2 |
7.5 |
4.5 |
A |
1450 |
1 2 3 4 5 6 7 |
666 657 637 617 568 519 460 |
2895 3286 3678 4069 4460 4851 5242 |
83.3 87.0 89.5 90.5 89.2 84.5 79.4 |
0.64 0.69 0.73 0.77 0.79 0.83 0.85 |
0.90 0.97 1.02 1.08 1.11 1.16 1.19 |
Y90S-2 |
1.1 |
5 |
A |
2900 |
1 2 3 4 5 6 7 |
3314 3265 3187 3049 2844 2589 2304 |
8050 9123 10197 11270 12343 13416 14490 |
84.2 87.6 90.0 91.0 89.8 85.3 80.5 |
8.80 9.44 10.03 10.49 10.86 11.31 11.52 |
10.12 10.86 11.53 12.06 12.49 13.01 13.25 |
Y160M2-2 |
15 |
5 |
A |
1450 |
1 2 3 4 5 6 7 |
823 813 794 764 715 647 578 |
4025 4562 5098 5635 6172 6708 7245 |
84.2 87.6 90.0 91.0 89.8 85.3 80.5 |
1.09 1.18 1.25 1.32 1.37 1.41 1.45 |
1.42 1.53 1.63 1.72 1.78 1.83 1.89 |
Y100L1-4 |
2.2 |
|
|
6.3 |
D |
1450 |
1 2 3 4 5 6 7 |
1323 1304 1274 1216 1137 1039 921 |
8320 9393 10467 11540 12614 13678 14761 |
84.8 88.1 90.5 91.4 90.2 85.9 81.3 |
3.61 3.86 4.09 4.26 4.42 4.60 4.65 |
4.42 4.73 5.01 5.22 5.41 5.63 5.69 |
Y132S-4 |
5.5 |
6.3 |
D |
960 |
1 2 3 4 5 6 7 |
578 568 558 529 500 451 402 |
5508 6219 6930 7641 8351 9062 9773 |
84.8 88.1 90.5 91.4 90.2 85.9 81.3 |
1.04 1.11 1.19 1.23 1.29 1.32 1.34 |
1.38 1.47 1.58 1.63 1.71 1.75 1.78 |
Y112M-6 |
2.2 |
8 |
D |
1450 |
1 2 3 4 5 6 7 |
2157 2118 2059 1971 1842 1676 1500 |
17585 19783 21982 24179 26378 28576 30774 |
85.7 88.8 91.0 91.9 90.8 86.7 82.4 |
12.29 13.10 13.81 14.40 14.87 15.35 15.56 |
14.4 15.4 16.2 16.9 17.4 18.0 18.3 |
Y180M-4 |
18.5 |
8 |
D |
960 |
1 2 3 4 5 6 7 |
941 931 902 863 804 735 657 |
11643 13098 14553 16009 17464 18919 20375 |
85.7 88.8 91.0 91.9 90.8 86.7 82.4 |
3.55 3.82 4.01 4.17 4.30 4.46 4.51 |
3.55 3.82 4.01 4.17 4.30 4.46 4.51 |
Y132M2-6 |
5.5 |
8 |
D |
730 |
1 2 3 4 5 6 7 |
549 539 519 500 470 421 382 |
8853 9960 11067 12173 13280 14387 15403 |
85.7 88.8 91.0 91.9 90.8 86.7 82.4 |
1.55 1.65 1.76 1.84 1.91 1.94 2.00 |
2.1 2.2 2.3 2.4 2.5 2.57 2.7 |
Y132M-8 |
3 |
|
|
10 |
D |
1450 |
1 2 3 4 5 6 7 |
3442 3363 3265 3108 2922 2678 2422 |
35420 39713 44006 48299 52593 56886 61179 |
87.6 90.3 92.2 93.0 92.0 88.5 84.7 |
38.6 41.1 43.3 44.8 46.4 48.0 48.6 |
45.3 48.2 50.8 52.6 54.4 56.3 57.0 |
Y250M-4 |
55 |
10 |
D |
960 |
1 2 3 4 5 6 7 |
1510 1480 1431 1363 1274 1176 1059 |
23450 26293 29135 31978 34820 37662 40505 |
87.6 90.3 92.2 93.0 92.0 88.5 84.7 |
11.2 12.0 12.6 13.0 13.4 13.9 14.1 |
13.1 14.1 14.8 15.3 15.7 16.3 16.5 |
Y200L1-6 |
18.5 |
10 |
D |
730 |
1 2 3 4 5 6 7 |
872 853 823 784 735 676 617 |
17832 19993 22155 24316 26478 28639 30801 |
87.6 90.3 92.2 93.0 92.0 88.5 84.7 |
4.9 5.2 5.5 5.7 5.9 6.1 6.2 |
5.8 6.1 6.5 6.7 6.9 7.1 7.3 |
Y160L-8 |
7.5 |
12.5 |
D |
960 |
1 2 3 4 5 6 7 |
2353 2304 2235 2128 2000 1833 1657 |
45800 51353 56904 62456 68008 73559 79111 |
87.6 90.3 92.2 93.0 92.0 88.5 84.7 |
34.20 36.40 38.32 39.69 41.07 42.33 42.99 |
40.13 42.71 44.97 46.58 48.19 49.67 50.45 |
Y280M-6 |
55 |
12.5 |
D |
730 |
1 2 3 4 5 6 7 |
1363 1333 1294 1235 1157 1059 961 |
34828 39050 43271 47492 51714 55936 60157 |
87.6 90.3 92.2 93.0 92.0 88.5 84.7 |
15.05 16.02 16.87 17.52 18.06 18.59 18.96 |
17.66 18.80 19.80 20.56 21.19 21.18 22.25 |
Y225M-8 |
22 |
|
Detailed Photos
Certifications
Packaging & Shipping
1) The equipment is equipped with a number of signs such as a product nameplate, rotation direction sign, wind direction sign, grounding sign, lifting sign, safety warnings, and so on.
2) Product nameplate mainly includes the contents of the equipment: main technical parameters (flow, pressure, motor power, Revolutions Per Minute), product number, manufacturing date, and so on, which is convenient for users to check at any time
3) Small equipment adopts the type of export wood packaging and large equipment, and the steel frame transports large cargo transportation.
4) All equipment is waterproof and rainproof.
5), Random files are placed in a moisture-proof packaging bag and are transported together with the equipment.
6) Appearance of all packaging is waterproof, moisture-proof, clean, and durable.
7) The appearance of the packaging is marked with product mark, hoisting mark, weight, etc.
8) After the equipment is packaged, they are loaded into a container or frame and transported by car to the port (train station).
9) The equipment adopts a split structure, and the outer dimensions of the packaging of the largest goods fully meet the relevant requirements of road transport and the sea.
Company Profile
Zibo Hengding Fan Co., Ltd. Is located in Industrial Park, Beijiao Town, Zhoucun District, Zibo City, Shandong Province, China. The company covers an area of 12,000 square meters and a construction area of 8,000 square meters. The company has total assets of 27 million RMB and 186 employees, 46 engineers, and technicians. It has passed ISO9001 quality management system certification and has maintained long-term technical cooperation relationships with many colleges and universities, such as Xi'an Jiaotong University, Tianjin Nankai University, and so on. Now, it has developed into a modern ventilation equipment manufacturing enterprise with first-class testing and producing equipment, high-quality and excellent production molds, strong scientific research and development strength, a strict quality management system, and gradually perfected development. The company has 15 years of production experience, with an annual output of 5,000 sets of ventilators.
With the market demand as the development direction, the company has always adhered to independent R&D and continuous innovation. Now it has developed into a modern environmental protection, and ventilation equipment enterprise, which mainly consists of mine fans, coal mine ventilators, and centrifugal ventilators. There are more than 50 series of ventilator products with more than 600 specification models, widely used in many industries, such as mines, coal mines, oil fields, chemical industry, kilns, metallurgy, boiler, textile and building materials, etc. The company's products are sold continuously with reliability in 29 provinces, cities, and autonomous regions of China, as well as Vietnam, Indonesia, Russia, Serbia, Pakistan, Kazakhstan, Tajikistan, Iraq, Saudi Arabia, and other countries.
We are willing to cooperate with all the new and old customers to create brilliance with first-class quality, reasonable prices, and a perfect service system.
General Manager Wang Baiqing welcomes friends from all walks of life to visit our company for inspection and guidance.
Strict quality standards, precision machining, and other spare parts and design maintain product stability, strictly select product parts suppliers, and perfect after-sales service system to allow customers to enjoy a new experience
Our company has introduced the latest research results of the Chinese Academy of Sciences, C4-II ternary flow wing twisted blades, which have high aerodynamic efficiency.
The surface of the ventilator impeller blade is sprayed with advanced super-resistant (CN) metal material to form a wear-resistant, anti-corrosion protection layer on the surface of the blade. The wear resistance of the blade surface is 10 to 50 times higher than that of the ordinary carbon steel material, thereby greatly prolonging the service life of the blade.
Our company adopts computer simulation calculation and quasi-ternary flow theory, we correct the blade shape and calculate coordinate parameters of its shape, then make the core mold and the external pressure mold of the blade, and the blades are formed by hot pressing. According to a large number of experiments, the tilting blade has a larger lift-to-drag ratio than the original organic blade type and is the best choice for the airfoil blade.
The blades are welded with high-strength carbon steel material. The petiole is treated with high-quality carbon steel. So that the blade maintains the strength and rigidity of the steel blade when ensuring the corrosion resistance and wear resistance of the blade. Moreover, it effectively protects the blade from corrosion resistance and wear resistance in a humid air environment, and improves the operating life of the ventilator.
Quality assurance measures:
In long-term production management, our company has formed a set of standardized process control measures and control points, which can provide users with high-quality products in all directions. Our company has a good reputation and is an enterprise that users can absolutely trust.
Our company has obtained the IS09001 certification from the International Organization for Standardization (see Enterprise Qualification Materials for details). We strictly standardize the operation process and control points of product manufacturing
After Sales Service
When the equipment of the buyer is installed, our company is responsible for on-site installation guidance, personnel training and commissioning of test-drive, The separately purchased fan accessories can be used for telephone connection guidance and debugging
Our company guarantees that the structural safety, aerodynamic performance, running noise, and appearance, quality of the supplied ventilators can be checked and accepted by relevant departments.
The quality assurance period for the supplied ventilator equipment, except for special provisions, is 18 months from the final acceptance of the ventilator; The warranty period for the individual parts of the fan is 6 months.
Before the expiration of the warranty period, if a problem with ventilator equipment occurs due to the manufacturing quality of our company, our company is responsible for free repair and replacement; if the problem is caused by the buyer, our company will also repair and replace it in time, and only charge its cost. ;
If out of our warranty period, our company also provides spare parts to the buyer at the most favorable price, guarantees to provide technical services for the equipment sold timely and with high quality, and the after-sales technical service is free for life, guarantees to arrive at the buyer's site for repair and technical guidance
Q. What information should I provide when inquiring?
A: Fan name/model, KW, Air pressure, Flow rate Air Volume, and temperature
Q. What is your warranty?
A. Our warranty is 18 months after receiving the fans. During the warranty period, replace the damaged parts free of charge. Out warranty period, to provide timely, high-quality technical services and price concessions spare parts to ensure.
continuous safe and high-quality equipment operation.
Q. How does your factory control product quality?
A. We have a quality inspection department. All fans are running more than 3 hours before delivery to test the quality. If there is a quality problem, we will produce a new one.
Q. What are your terms of payment?
A. TT 40% AS THE ADVANCE PAYMENT AND TT 60% AFTER INSPECTION BEFORE SHIPPING.
B. 100% IRREVOCABLE L/C AT STGHT.
Q. What products do you produce?
A. Centrifugal fan, tunnel fan, axial fan, jet fan, mining fan, exhaust fan,anti-corrosion blower, high-pressure blower, explosion proof fan, fan accessories, etc, welcome to contact us to learn more details.
Q. Where is your factory? Can I visit your factory?
A. Zibo Hengding Fan Co., Ltd. Is located in Industrial Park, Beijiao Town, Zhoucun District, Zibo City, Shandong Province, China.
Q. How long will it take to ship after the order?
A. 10-15 Days if you need it urgently, we can discuss it for shorting time.
Q. Is the product customizable?
A. Various types can be customizable.