4-68 centrifugal fan
4-68 centrifugal fans (hereinafter referred to as fans) can be used for general ventilation. Its service conditions are as follows:
1. Application site: As the indoor ventilation of general factories and large buildings, it can be used as both input gas and output gas.
2. Types of gas to be transported: air and other gases that are not spontaneous combustion, harmless to the human body, and non-corrosive to steel materials.
3. Impurities in the gas: there shall be no viscous substances in the gas, and the dust and hard particles contained in the gas shall not exceed 150 mg/m3.
4. The temperature of gas shall not exceed 80 ºC.
2. Fan type:
1. The fan is single suction, and the machine numbers are № 2.8, 3.15, 3.55, 4, 4.5, 5, 6.3, 8, 10, 12.5, 16, 20, etc.
2. Each type of fan can also be made into two types right rotation or left rotation. When viewed from one end of the motor, the impeller rotates clockwise, which is called the right rotation fan, which is represented by "right". counterclockwise, which is called left rotation fan, and is represented by "left".
3. The outlet position of the fan is expressed by the outlet angle of the casing. Both "left" and "right" can be made into 0o, and 45o, such as 135o, 180o, and 225o.
3. Structural characteristics of main components
№ 2.8-5 of 4-68 fan is mainly composed of an impeller, casing, air inlet, and other parts equipped with a direct-connected motor. № 6.3-20 has a transmission part in addition to the above parts.
1. Impeller: It is composed of 12 backward-inclined wing-shaped blades welded between the single-cone wheel cover and the flat-plate wheel disc. They are all made of steel plates and have been calibrated by static and dynamic balance, with good air performance, high efficiency, and stable operation.
2. Casing: the casing is a volute formed by welding ordinary steel plates. The casing is made into two different types. № 2.8-12.5 casing is integral and cannot be disassembled. № 16 and № 20 casings are made into three open types, and the upper part is divided into two parts along the vertical centerline, in addition to being divided into two parts along the horizontal plane of the split, which are connected by bolts.
3. Air inlet: it is made into a converging streamlined integral structure and fixed on the inlet side of the fan with bolts.
4. Drive group: composed of main shaft, bearing box, rolling bearing, pulley or coupling, etc. The spindle is made of high-quality steel. № 6.3-12.5 fans of four unit numbers are of integral structure, with a thermometer and oil pointer installed on the bearing. № 16 and № 20 fans of two unit numbers are equipped with two parallel bearing blocks, with thermometers installed on the bearing block and lubricated with bearing grease.4-68
Product Parameters
| Table of performance parameters of 4-68 type NO. 4A, 4.5A and 5A |
| Machine number |
Drive mode |
Speed r/min |
Serial number |
Full pressure Pa |
Flow m3/h |
Internal efficiency% |
Internal power KW |
Required power KW |
Model Power
|
| Model |
power |
| 4 |
A |
2900 |
1
2
3
4
5
6
7 |
2069
2059
2010
1931
1794
1627
1431 |
3984
4534
5083
5633
6182
6732
7281 |
82.3
86.2
88.9
90.0
88.6
83.6
78.2 |
2.78
3.01
3.19
3.36
3.48
3.64
3.70 |
3.34
3.61
3.83
4.03
4.18
4.37
4.44 |
Y112M-2 |
4 |
| 4 |
A |
1450 |
1
2
3
4
5
6
7 |
519
509
500
480
451
402
353 |
1992
2267
2542
2816
3091
3366
3641 |
82.3
86.2
88.9
90.0
88.6
83.6
78.2 |
0.35
0.37
0.40
0.42
0.44
0.45
0.46 |
0.53
0.56
0.60
0.63
0.66
0.65
0.69 |
Y802-4 |
0.75 |
| 4.5 |
A |
2900 |
1
2
3
4
5
6
7 |
2657
2628
2569
2461
2294
2069
1833 |
5790
6573
7355
8137
8920
9702
10485 |
83.3
87.0
89.5
90.5
89.2
84.5
79.4 |
5.13
5.51
5.86
6.15
6.37
6.60
6.72 |
5.90
6.34
6.74
7.07
7.33
7.59
7.73 |
Y132S2-2 |
7.5 |
| 4.5 |
A |
1450 |
1
2
3
4
5
6
7 |
666
657
637
617
568
519
460 |
2895
3286
3678
4069
4460
4851
5242 |
83.3
87.0
89.5
90.5
89.2
84.5
79.4 |
0.64
0.69
0.73
0.77
0.79
0.83
0.85 |
0.90
0.97
1.02
1.08
1.11
1.16
1.19 |
Y90S-2 |
1.1 |
| 5 |
A |
2900 |
1
2
3
4
5
6
7 |
3314
3265
3187
3049
2844
2589
2304 |
8050
9123
10197
11270
12343
13416
14490 |
84.2
87.6
90.0
91.0
89.8
85.3
80.5 |
8.80
9.44
10.03
10.49
10.86
11.31
11.52 |
10.12
10.86
11.53
12.06
12.49
13.01
13.25 |
Y160M2-2 |
15 |
| 5 |
A |
1450 |
1
2
3
4
5
6
7 |
823
813
794
764
715
647
578 |
4025
4562
5098
5635
6172
6708
7245 |
84.2
87.6
90.0
91.0
89.8
85.3
80.5 |
1.09
1.18
1.25
1.32
1.37
1.41
1.45 |
1.42
1.53
1.63
1.72
1.78
1.83
1.89 |
Y100L1-4 |
2.2 |
|
| |
| 6.3 |
D |
1450 |
1
2
3
4
5
6
7 |
1323
1304
1274
1216
1137
1039
921 |
8320
9393
10467
11540
12614
13678
14761 |
84.8
88.1
90.5
91.4
90.2
85.9
81.3 |
3.61
3.86
4.09
4.26
4.42
4.60
4.65 |
4.42
4.73
5.01
5.22
5.41
5.63
5.69 |
Y132S-4 |
5.5 |
| 6.3 |
D |
960 |
1
2
3
4
5
6
7 |
578
568
558
529
500
451
402 |
5508
6219
6930
7641
8351
9062
9773 |
84.8
88.1
90.5
91.4
90.2
85.9
81.3 |
1.04
1.11
1.19
1.23
1.29
1.32
1.34 |
1.38
1.47
1.58
1.63
1.71
1.75
1.78 |
Y112M-6 |
2.2 |
| 8 |
D |
1450 |
1
2
3
4
5
6
7 |
2157
2118
2059
1971
1842
1676
1500 |
17585
19783
21982
24179
26378
28576
30774 |
85.7
88.8
91.0
91.9
90.8
86.7
82.4 |
12.29
13.10
13.81
14.40
14.87
15.35
15.56 |
14.4
15.4
16.2
16.9
17.4
18.0
18.3 |
Y180M-4 |
18.5 |
| 8 |
D |
960 |
1
2
3
4
5
6
7 |
941
931
902
863
804
735
657 |
11643
13098
14553
16009
17464
18919
20375 |
85.7
88.8
91.0
91.9
90.8
86.7
82.4 |
3.55
3.82
4.01
4.17
4.30
4.46
4.51 |
3.55
3.82
4.01
4.17
4.30
4.46
4.51 |
Y132M2-6 |
5.5 |
| 8 |
D |
730 |
1
2
3
4
5
6
7 |
549
539
519
500
470
421
382 |
8853
9960
11067
12173
13280
14387
15403 |
85.7
88.8
91.0
91.9
90.8
86.7
82.4 |
1.55
1.65
1.76
1.84
1.91
1.94
2.00 |
2.1
2.2
2.3
2.4
2.5
2.57
2.7 |
Y132M-8 |
3 |
|
| |
| 10 |
D |
1450 |
1
2
3
4
5
6
7 |
3442
3363
3265
3108
2922
2678
2422 |
35420
39713
44006
48299
52593
56886
61179 |
87.6
90.3
92.2
93.0
92.0
88.5
84.7 |
38.6
41.1
43.3
44.8
46.4
48.0
48.6 |
45.3
48.2
50.8
52.6
54.4
56.3
57.0 |
Y250M-4 |
55 |
| 10 |
D |
960 |
1
2
3
4
5
6
7 |
1510
1480
1431
1363
1274
1176
1059 |
23450
26293
29135
31978
34820
37662
40505 |
87.6
90.3
92.2
93.0
92.0
88.5
84.7 |
11.2
12.0
12.6
13.0
13.4
13.9
14.1 |
13.1
14.1
14.8
15.3
15.7
16.3
16.5 |
Y200L1-6 |
18.5 |
| 10 |
D |
730 |
1
2
3
4
5
6
7 |
872
853
823
784
735
676
617 |
17832
19993
22155
24316
26478
28639
30801 |
87.6
90.3
92.2
93.0
92.0
88.5
84.7 |
4.9
5.2
5.5
5.7
5.9
6.1
6.2 |
5.8
6.1
6.5
6.7
6.9
7.1
7.3 |
Y160L-8 |
7.5 |
| 12.5 |
D |
960 |
1
2
3
4
5
6
7 |
2353
2304
2235
2128
2000
1833
1657 |
45800
51353
56904
62456
68008
73559
79111 |
87.6
90.3
92.2
93.0
92.0
88.5
84.7 |
34.20
36.40
38.32
39.69
41.07
42.33
42.99 |
40.13
42.71
44.97
46.58
48.19
49.67
50.45 |
Y280M-6 |
55 |
| 12.5 |
D |
730 |
1
2
3
4
5
6
7 |
1363
1333
1294
1235
1157
1059
961 |
34828
39050
43271
47492
51714
55936
60157 |
87.6
90.3
92.2
93.0
92.0
88.5
84.7 |
15.05
16.02
16.87
17.52
18.06
18.59
18.96 |
17.66
18.80
19.80
20.56
21.19
21.18
22.25 |
Y225M-8 |
22 |
|
Detailed Photos
Certifications
Packaging & Shipping
1) The equipment is equipped with a number of signs such as a product nameplate, rotation direction sign, wind direction sign, grounding sign, lifting sign, safety warnings, and so on.
2) Product nameplate mainly includes the contents of the equipment: main technical parameters (flow, pressure, motor power, Revolutions Per Minute), product number, manufacturing date, and so on, which is convenient for users to check at any time
3) Small equipment adopts the type of export wood packaging and large equipment, and the steel frame transports large cargo transportation.
4) All equipment is waterproof and rainproof.
Company Profile
Zibo Hengding Fan Co., Ltd. Is located in Industrial Park, Beijiao Town, Zhoucun District, Zibo City, Shandong Province, China. The company covers an area of 12,000 square meters and a construction area of 8,000 square meters. The company has total assets of 27 million RMB and 186 employees, 46 engineers, and technicians. It has passed ISO9001 quality management system certification and has maintained long-term technical cooperation relationships with many colleges and universities, such as Xi'an Jiaotong University, Tianjin Nankai University, and so on. Now, it has developed into a modern ventilation equipment manufacturing enterprise with first-class testing and producing equipment, high-quality and excellent production molds, strong scientific research and development strength, a strict quality management system, and gradually perfected development. The company has 15 years of production experience, with an annual output of 5,000 sets of ventilators
Our Advantages
Strict quality standards, precision machining, and other spare parts and design maintain product stability, strictly select product parts suppliers, and perfect after-sales service system to allow customers to enjoy a new experience
Our company has introduced the latest research results of the Chinese Academy of Sciences, C4-II ternary flow wing twisted blades, which have high aerodynamic efficiency.
The surface of the ventilator impeller blade is sprayed with advanced super-resistant (CN) metal material to form a wear-resistant, anti-corrosion protection layer on the surface of the blade. The wear resistance of the blade surface is 10 to 50 times higher than that of the ordinary carbon steel material, thereby greatly prolonging the service life of the blade.
Quality assurance measures:
In long-term production management, our company has formed a set of standardized process control measures and control points, which can provide users with high-quality products in all directions. Our company has a good reputation and is an enterprise that users can absolutely trust.
Our company has obtained the IS09001 certification from the International Organization for Standardization (see Enterprise Qualification Materials for details). We strictly standardize the operation process and control points of product manufacturing
After Sales Service
When the equipment of the buyer is installed, our company is responsible for on-site installation guidance, personnel training and commissioning of test-drive, The separately purchased fan accessories can be used for telephone connection guidance and debugging
Our company guarantees that the structural safety, aerodynamic performance, running noise, and appearance, quality of the supplied ventilators can be checked and accepted by relevant departments.
The quality assurance period for the supplied ventilator equipment, except for special provisions, is 18 months from the final acceptance of the ventilator.
Q. What information should I provide when inquiring?
A: Fan name/model, KW, Air pressure, Flow rate Air Volume, and temperature
Q. What is your warranty?
A. Our warranty is 18 months after receiving the fans. During the warranty period, replace the damaged parts free of charge. Out warranty period, to provide timely, high-quality technical services and price concessions spare parts to ensure.
continuous safe and high-quality equipment operation.
Q. How does your factory control product quality?
A. We have a quality inspection department. All fans are running more than 3 hours before delivery to test the quality. If there is a quality problem, we will produce a new one.
Q. What are your terms of payment?
A. TT 40% AS THE ADVANCE PAYMENT AND TT 60% AFTER INSPECTION BEFORE SHIPPING.
B. 100% IRREVOCABLE L/C AT STGHT.
Q. What products do you produce?
A. Centrifugal fan, tunnel fan, axial fan, jet fan, mining fan, exhaust fan,anti-corrosion blower, high-pressure blower, explosion proof fan, fan accessories, etc, welcome to contact us to learn more details.
Q. Where is your factory? Can I visit your factory?
A. Zibo Hengding Fan Co., Ltd. Is located in Industrial Park, Beijiao Town, Zhoucun District, Zibo City, Shandong Province, China.
Q. How long will it take to ship after the order?
A. 10-15 Days if you need it urgently, we can discuss it for shorting time.
Q. Is the product customizable?
A. Various types can be customizable.
Contact Us
Company: Zibo Hengding Fan Co., Ltd.
Address: Industrial Park, Beijiao Town, Zhoucun District, Zibo City, Shandong Province, China.
Website: http://hengdingfan.en.made-in-china.com
Tel: +86 15653306160
Fax: +86-533-6069989
Cellphone: +86 15653306160
https://hengdingfan.en.made-in-china.com/contact-info.html
Audited Supplier 
){kind=link}