Product Description
Centrifugal Blower Fan, high-temperature boiler induced draft fan The usage of the ventilator The model G, Y6-41 boiler centrifugal drum and the induced draft fan is designed for adapting the industrial boiler that burns a variety of coal and is equipped with dust and smoke removal devices. The new series of low noise...
Centrifugal Blower Fan:
High-temperature boiler-induced draft fan
The usage of the ventilator
The model G, Y6-41 Centrifugal boiler Blower Fan, and induced draft fan are designed for adapting the industrial boiler that burns a variety of coal and is equipped with dust and smoke removal devices. The new series of low-noise boiler drums and induced draft fans with the highest total pressure efficiency of higher than 80% can be selected by all the items with the equivalent intake conditions and suitable performance.
The features of the ventilator
The model G, Y6-41 series centrifugal ventilator is a replacement product of the boiler drum and induced draft fan.
The design method of the model G, Y6-41 series ventilator follows the design principles of selecting the appropriate ventilator type, reasonable operating parameters and preferred flow pattern, organizing the gas source reasonably, designing the blade type carefully, increasing the gap of wind tongue, reducing the rotate speed appropriately, improving the volute design, purifying flow and minimizing the secondary flow loss as much as possible, etc. Moreover, the conduct optimal design for the wind gap by the combination of using the finite difference method for the numerical calculation of the air inlet and impeller cap lines and taking the flow field uniformity at the fan impeller inlet as the optimization criterion. Then, combine the above method with the original, optimized design method of fan impeller and volute to integrate the optimal design procedure of impeller, volute, and air inlet with a lower noise level and smaller size of the fan.
Centrifugal Blower Fan, model G, and Y6-41 series ventilators have been tested by Shenyang Blower Research Institute and have achieved good results. The test data is quoted as follows:
Induced draft fan: Y6-41-11No7.1C matched with 4 tons / hourly coal-fired boiler:
Working temperature: 20 The features of the ventilator
0 ° C; rotate speed: 2100 rev/min
Design operating parameters: flux: 12500 m³ / h; full pressure: 2596 Pa
Product Specifications:
| Model No |
GY6-41 3.55C-8.5A |
| Use |
Dust and smoke removal |
| Voltage (V) |
380V/400V/415V/440V/450V/660V/1140V |
| Color |
Blue/Red/White/Gray/Yellow/Customized |
| Application Industries |
Widely used in large and medium-sized factories, steel, textile, chemical, kiln, power plants, air treatment equipment, hot air circulation, equipment, factory/building ventilation air/gas transport cooling. Generally, used for ventilation, process gas transport, etc |
| Size |
Have many sizes Can provide according to customers requirement |
| Brand Name |
Zhi Feng |
| Power |
O.55~55KW |
| Rotating Speed |
2800~1480rpm |
| Total Pressure |
451~4086Pa |
| Airflow |
1043~21M3/h |
| Package |
Wooden Box/Steel frame |
| Material |
SS304,SS316 and Q235 |
| Frequency |
50Hz/60Hz |
| Impeller Type |
Backward/Forward/Radial Blade |
| After-Sales Service |
Online support |
| Efficiency(%) |
Over 85% |
| Exported to |
All Countries |
| Warranty |
18 Months |
Product Parameters
G, Y6-41 Centrifugal blower fan Performance Table
| machine number |
Rotating Speed
R/min |
Total
Pressure |
Airflow
M³/h |
Electric motor |
| model |
power |
| 3.55C-8.5A |
2800~1480rpm |
451~4086Pa |
1043~21M3/h |
YZA-7122-Y250M-4B3 |
O.55~55KW |
Certifications
Packaging & Shipping
1) Small equipment adopts the type of export wood packaging and large equipment, and the steel frame transports large cargo transportation.
2) All equipment is waterproof and rainproof.
3), Random files are placed in a moisture-proof packaging bag and are transported together with the equipment.
4) Appearance of all packaging is waterproof, moisture-proof, clean, and durable.
5) The appearance of the packaging is marked with product mark, hoisting mark, weight, etc.
6) After the equipment is packaged, they are loaded into a container or frame and transported by car to the port (train station).
7) The equipment adopts a split structure, and the outer dimensions of the packaging of the largest goods fully meet the relevant requirements of road transport.
Company Profile
Zibo Hengding Fan Co., Ltd. Is located in Industrial Park, Beijiao Town, Zhoucun District, Zibo City, Shandong Province, China. The company covers an area of 12,000 square meters and a construction area of 8,000 square meters. The company has total assets of 27 million RMB and 186 employees, 46 engineers, and technicians. It has passed ISO9001 quality management system certification and has maintained long-term technical cooperation relationships with many colleges and universities, such as Xi'an Jiaotong University, Tianjin Nankai University, and so on. Now, it has developed into a modern ventilation equipment manufacturing enterprise with first-class testing and producing equipment, high-quality and excellent production molds, strong scientific research and development strength, a strict quality management system, and gradually perfected development. The company has 15 years of production experience, with an annual output of 5,000 sets of ventilators.
With the market demand as the development direction, the company has always adhered to independent R&D and continuous innovation. Now it has developed into a modern environmental protection, and ventilation equipment enterprise, which mainly consists of mine fans, coal mine ventilators, and centrifugal ventilators. There are more than 50 series of ventilator products with more than 600 specification models, widely used in many industries, such as mines, coal mines, oil fields, chemical industry, kilns, metallurgy, boiler, textile and building materials, etc. The company's products are sold continuously with reliability in 29 provinces, cities, and autonomous regions of China, as well as Vietnam, Indonesia, Russia, Serbia, Pakistan, Kazakhstan, Tajikistan, Iraq, Saudi Arabia, and other countries.
As a manufacturer specializing in ventilation equipment, it is committed to providing superior quality products with advanced technology to customers. We will continue to make new contributions to the development of the ventilator industry based on the management philosophy of "Peng Fei''!
As a manufacturer specializing in ventilation equipment, it is committed to providing superior quality products with advanced technology to customers. We will continue to make new contributions to the development of the ventilator industry based on the management philosophy of "responsibility, teamwork, efficiency and innovation" and the enterprise spirit of "Faith determines height and quality creates brilliance".
We are willing to cooperate with all the new and old customers to create brilliance with first-class quality, reasonable prices, and a perfect service system.
General Manager Wang Baiqing warmly welcomes friends from all walks of life to visit our company for inspection and guidance.
Tel: 86-13806434669 +8615653306160
Our Advantages
Strict quality standards, precision machining, and other spare parts and design maintain product stability, strictly select product parts suppliers, and perfect after-sales service system to allow customers to enjoy a new experience
After Sales Service
Quality assurance measures:
In long-term production management, our company has formed a set of standardized process control measures and control points, which can provide users with high-quality products in all directions. Our company has a good reputation and is an enterprise that users can absolutely trust.
Our company has obtained the IS09001 certification from the International Organization for Standardization (see Enterprise Qualification Materials for details). We strictly standardize the operation process and control points of product manufacturing, mainly reflected in the following links:
FAQ
1. How can we guarantee the quality?
Always a pre-production sample before mass production
Always final Inspection before shipment
2. What can you buy from us?
Mining fans, Centrifugal fans, Tunnel fans, Axial flow ventilators, Explosion-proof Axial fans, Boiler fans, Spray fans, dust collector fans, exhaust fans, ventilation fans, misting fans, and industrial all kinds of fans
3. Why should you buy from us, not from other suppliers?
More than 15 years in an industry
Strict quality control
Competitive price
We Promise To Find Your The Right Equipment
Audited Supplier 
){kind=link}
){kind=link}